You must be logged in to post messages.
Please login or register

Archimedes Workshop (Tech Help)
Moderated by Chonaman

Hop to:    
Welcome! You are not logged in. Please Login or Register.2 replies
Rise and Fall Heaven » Forums » Archimedes Workshop (Tech Help) » Problem with Frontline
Bottom
Topic Subject:Problem with Frontline
garthnok
Conscript
posted 09-30-06 01:36 AM EDT (US)         
I installed the game fine and rebooted.

When I start up the game, it starts a frontline protection system. My drive revs to very high rpms, sounds like its getting ready to take off. Then, I keep getting a disc read error, followed by frontline telling me to insert the disk. It is very frustrating, cause it sounds as if my disk drive is about to fly apart.

Windows XP SP2
P4 2.8 ghz
2 GB Ram
ATI 850 Pro 256MB
DVD-RW VOM-12E48X

AuthorReplies:
GoSailing
EEH Seraph
posted 09-30-06 10:57 AM EDT (US)     1 / 2       
Check to make sure RaF is the only disc in the drive... This may sound stupid but that happened to me with Halo. One got stuck to my Halo disc and my drive just went crazy.

"It seems to me the humour of Sails is so dry you could strike a match on it and it would be the humour that caught fire." - Friend of Old
Coffeeman
Conscript
posted 10-05-06 12:34 PM EDT (US)     2 / 2       
Try something called drivespeed, cdspeed, or nero drivespeed and try reading at a slower speed. Starforce (new name is Frontline) seems to have a problem with this since it automaticly spins the disc at the max speed and ofcourse read errors might happen, now starforce is automaticly supposed to slow down the reading of the drive when it has trouble reading, but you know how it is. Windows xp might detect those read errors as Input/Output errors and thus starts to do a dma stepdown, which is usually bad for cddrives and can cause malfunctions since they are not supposed to operate in PIO mode under normal operations not to mention burning goes very very slow due to the pio mode (which is the slowest transfer rate, and the cpu does all the work).

Not to mention the protection has been known to spin the cd drives at max speed for as long as 20 minutes for some, before it passes or fails the cdcheck, the whole system is locked during that time. Meaning the cpu (all cpu cores) is at max load (100%), can't be good for the cd or the drive.
It also used to cause conflicts (and probably still does) with software like speedfan that monitors cpu temperature and controls the rpm of the fans to malfunction, since they have no cpu to process during that time and thus stops functioning. Where during heavy load they are supposed to speedup the fans but this doesn't happen since starforce (frontline) takes control of the whole cpu during its cdcheck leaving nothing left to other software and tasks, thus the cpu runs very, very hot. When they slowed the reading with something, like drivespeed it passed the cdcheck in just a few seconds.

http://www.almico.com/speedfan.php
http://www.cdspeed2000.com/go.php3?link=nerodrivespeed.html
"
Reading damaged discs

When a drive has trouble reading a disc, it automatically slows down and reads the bad sectors again.
After reading the bad sectors, the drive usually spins up again. If there are many errors on the disc then the drive will constantly spin-up/spin-down. This is very bad for the mechanical parts of the drive.
By slowing down the drive by software, the drive does not need to change the speed while reading a damaged disc."

You must be logged in to post messages.
Please login or register

Hop to:    

Rise and Fall Heaven | HeavenGames